induction heat the plough discs

Heat the plough discs Objective To heat the circumference of plough discs before hot rolling (sharpening) processMaterial Flat Boron steel discs, OD 460 to 710 mm (18 to 28”) thickness 3.2 to 10 mm (8/64 to 25/64”)Temperature 725C 1335FFrequency 75 kHzEq…

induction fusing the butt joint

Fusing the butt jointObjective: Fuse elastomer (TPE) tubes together in two ways, as a butt joint and as a overlap joint.Material: PeBax tubing 3/16” (4.76) OD, 1/8” (3.18 mm) ID and slightly largerStainless steel Teflon coated mandrel 1/8” (3.18 mm) dia…

induction heating catheter tipping die

Heating Catheter Tipping Die Objective: To heat an aluminum catheter tipping die to above 2850F within 2 to 5 seconds for the forming of catheter material. Presently, heating is performed in 15 seconds with older induction equipment. The customer would lik…

induction soldering connectors together

Soldering connectors together Objective Soldering two connectors simultaneously to a tin plated copper ground plateMaterial Tin plated copper ground plate 4” x 1.75” (101.6mm x 44.45mm), 2 connectors, one with12 pins & one with 4 pins and 60/40 solde…

electromagnetic induction and the joule effect

Induction Heating has the important characteristic that the heat is generated in the material to be heated itself. Principle of induction heatingBecause of this, induction has a number of intrinsic trumps, such as a very quick response and a good effici…

film capacitor module in the application of induction heating system

Induction heating technology used in home appliance on the early and later with high efficiency, energy saving and environmental advantages of growing significantly, with products using the technology is mature and stable, induction heating industry began …

theory of heating by induction

Induction Heating was first noted when it was found that heatwas produced in transformer and motor windings, as mentioned in theChapter “Heat Treating of Metal” in this book. Accordingly, the theory ofinduction heating was studied so that motors and tran…

induction heating of the aluminum wire before isolation

Manufacturing of self-bearing insulated cable includes the operation of heating of continuously moving aluminum conductons to temperature 80-120 C prior to application of polyethylene isolation.

what is the hs code of induction heating machine

851440****(8514400000/8514400090). DescriptionOther equipment for the heat treatment of materials by induction or dielectric loss. Goods ever classified under this HS code(usually 8514400000~8514400090)intermediate frequency interaction smelting furnace ,i…

base induction coil design and theory

Induction coil is the key point of leading induction heating machine work successfully.